CathStack
New CathStack 6: real parts to BOM
Catheter shaft design software

Every layer.
Every tolerance.
One model.

Stack-up, mechanics and a parametric Onshape model, from one description of your shaft.

Windows · macOSRuns locallyOnshape
4
Stack-up methods
12
Mechanical results, banded
70
Cited material grades
64
Reference constructions tested
New in CathStack 6

From product page to bill of materials.

From product page to bill of materials supplier.example/ptfe-liner Etched PTFE liner 0.0715 in ID · 0.00075 in wall Tubing ID (in)0.0715 Wall (in)0.00075 MaterialPTFE Part numberSL-0715 $250.00 10 per pack Save to CathStack My components 4 parts PTFE liner ID .0715 · wall .00075 new Pebax 72D tube.0745 × .0790 Nylon 12 tube.0800 × .0870 FEP heat shrink.095 exp / .073 rec Fit my components 3 of 3 fitted Cpk 1.42 BILL OF MATERIALS · 10 SHAFTS PTFE liner SL-0715$500 Pebax 72D tube$360 FEP heat shrink$120 Total$980

Components and BOM

How it works

Describe it once.

01

Build

Layers, lumens and tolerances, segment by segment.

02

Check

Worst case, RSS, Monte Carlo and Cpk, live.

03

Model

A parametric Onshape part, drawings and a PDF report.

04

Buy

Real parts fitted, and the bill of materials.

Output

Real geometry. Real spread.

Cut-back sheath model in Onshape
Cut-back sheath
Monte Carlo OD distribution against the ceiling
Monte Carlo vs ceiling
2-over-2 braid modelled as geometry
2-over-2 braid
True-scale cross-section
True scale
Contribution Pareto
What drives the OD
Pro

Know how it behaves.

Mechanics

Stiffness, burst, kink, banded.

Steering

Pull-wire deflection, physics-checked.

Materials

70 grades, every value cited.

Reverse

From target ODs to tubes to buy.

Compare editions

See it on your shaft.

A live walkthrough on your own construction.