From stack-up to stiffness.
Standard designs and checks the shaft. Pro tells you how it behaves.
Build the stack.
Inside to out, drawn to scale as you type.
- Liner, braid, coil, jacket, lumens, shrink
- Asymmetric tolerances, any distribution
- Inch or mm, French size throughout

See the spread.
Every result with its band and its capability.
- Worst case, RSS, modified RSS, Monte Carlo
- Cp / Cpk, including ISO 22514-2
- Pareto of what drives each result

Model it.
A parametric Onshape part in your own account.
- Braid and coil wires as real geometry
- Variable table with a nominal / max / min switch
- Rotate it in the built-in 3D viewer

Real components
Save
One click on a supplier product page.
Fit Pro
Your saved parts on every layer, re-checked.
Find Pro
Claude searches for parts that fit.
BOM Pro
Lines, packs and cost per build.
Also included
Segments
Proximal to distal, side by side.
Drawings
PDF and DXF, ASME or ISO.
Reports
PDF and CSV for design review.
Local
No cloud, no telemetry.
Help on every field
A ? next to every input and result.
Materials window
Pick a material per layer; library in Pro.
Signed updates
Optional, verified, one click.
64 references
Constructions to start from.
How it behaves
Mechanics
EI, GJ, EA, burst, collapse, tensile, kink and column load, each with a tolerance band.
Steering
Pull-wire deflection, friction and wire safety, checked against MuJoCo physics.
Materials
70 catheter grades, every value with its source.
Reverse
Target ODs to the tube sizes to buy, and tolerances for a target Cpk.
See it on your shaft.
A live walkthrough on your own construction.