From product page
to bill of materials.
Save real parts with one click. Fit them to your shaft. Know what to buy.
Save. Fit. Buy.
Save
One click on a product page.
Check
Every value, before it's kept.
Fit
Liner, tubes and shrink, re-checked.
Buy
Lines, packs and cost.
One click to save.
The CathStack extension for Chrome and Edge reads the component you're looking at.
- ID, OD, wall and tolerances, inch or mm
- Seller, part number, price and pack size
- Any supplier or marketplace page
- Kept in the extension until CathStack is open
Fit real parts.
CathStack picks the saved part that fits each layer, then re-runs the stack-up.
- Liner matched to the mandrel
- Tubes that load and land on your OD
- Heat shrink that loads, drives and doesn't crush
- Nothing changes until you apply
Let Claude find them.
CathStack works out what each layer needs and Claude searches the web for listed parts that fit, each with its source page.
- Your own Claude API key, kept in your system keychain
- Candidates without a source page are dropped
- You choose what to keep
The bill of materials.
| Part | Used in | Per shaft | Packs | Cost |
|---|---|---|---|---|
| PTFE linerSL-0715 | Proximal, Transition, Tip | 28.3 in | 2 | $500 |
| Pebax 72D tubePB-0745 | Proximal | 23.6 in | 3 | $360 |
| Pebax 35D tubePB-0745S | Tip | 1.6 in | 1 | $95 |
| FEP heat shrinkFS-095 | Proximal, Transition, Tip | 28.3 in | 1 | $120 |
| 10 shafts · 10 % scrap | $1,075 | |||
Merged across segments. Layers without a part are listed, never skipped. Export to CSV. Illustrative values.
Local
The extension talks only to CathStack on your computer.
On your click
Reads only the page you're on, only when you ask.
You check
Every value is shown before it's saved.
Your key
Claude use is optional and billed to your own account.
Two minutes, once.
Open
CathStack → Components → Open extension folder.
Developer mode
chrome://extensions or edge://extensions.
Load unpacked
Choose the folder; pin the icon.
Pair
Pair extension… shows a 6-digit code.
Save
On a product page: Save to CathStack.
Step by step in the app: Help → Install the browser extension.
Questions
Which browsers?
Chrome and Edge on Windows and macOS. The app works without the extension too: add parts by hand or from a CSV.
How do I install it?
It ships with CathStack 6. Follow the five steps above; the app's Help has the same guide.
Which websites?
Any supplier or marketplace product page. Pages that list specifications as a table are read directly; for others, Read with Claude fills the values in. Each site's own terms of use apply.
Does anything go to the cloud?
No. Parts are stored on your computer. Only when you use a Claude feature is the page text or the list of requirements sent to Anthropic, with your key. See privacy.
Is Claude required?
No. Saving, fitting and the bill of materials work without it.
Which edition?
The extension and My components are in every edition. Fitting real parts, Claude part search and the bill of materials are Pro. See editions.
See it on your shaft.
From your parts list to a checked build.